One Home Made

February 15, 2011

Home Office: Refinishing an Antique Desk & Chair

Remember this Craigslist chair?

old fashioned wooden desk chair — Old fashioned wooden desk chair.

We bought it to go with an old desk that Pavlo owned prior to us getting married. It was the perfect size for the space we were going to use as a home office, but as you can see it desperately needed some TLC.

Before of desk — Before image of desk. At this point Pavlo had sanded the top but I stopped him from getting to the legs so I could snap a pic.

We completed the refinishing of these items so I thought I’d reveal our final products. I’ll start with the chair first. Based on some very basic research we’re estimating that the chair is from the early 1900’s. It still has the metal label stating it was made by a Philadelphia based company called the “Jos. L Shoemaker Company”. I didn’t do very extensive research on this company but a simple internet search reveals little more than that the company was established in 1884. If any of you readers have more knowledge about antiques than please give me your input, I honestly chose this chair based on the style more than anything else! You see, much like the “Pen and Ink Chair Cover Pillows” from Pottery Barn that I mentioned in the previous post, I fell in love with these chairs from Pottery Barn. Problem was they cost $399…not quite in our budget! From there I hit Craigslist almost daily for months before coming up with the listing for what is now our chair.

Despite being quite old the chair was still in remarkably good shape. It was missing all four of it’s casters (wheels) and definitely needed a new paint or stain job, but other then that we were really happy with our $40 purchase! Yup, you read right, only $40!

Pavlo immediately hit the internet for some metal hooded casters with rubber wheels. Basically, we wanted to maintain the antique look of the chair by getting casters that were made of metal (versus plastic) and that had rubber wheels so they wouldn’t destroy our hardwood floors. Here’s what we found:

So much better for this antique chair than the standard caster (seen below), don’t you think?

Standard Desk Caster — Standard Chair Caster

While Pavlo purchased those I decided on a color. I had to keep in mind that whichever color I chose for the chair would have to coordinate with the color we refinished the desk. I decided painting the chair the “Antique White” milk paint by General Finishes would work best with both the desk and the colors of the room in general. Given that we have a little one in the house and that I’m pregnant with #2, we tend to work a lot with low-VOC paints and water based stains. Our favorite paint for refinishing furniture is milk paint because it is low-VOC and gives such an incredibly smooth finish.

With the decision on color made, the sanding and painting began. However, before I reveal what our chair looks like now I’ll tell you what we did to Pavlo’s old desk. We removed all of the hardware, repaired a few damaged areas and sanded it in preparation for paint or stain.

before of desk. after ALL sanding — Desk after repairs had been made and ALL the sanding was done.

For this piece I was going to stain the top and paint the base but after seeing the top sanded down I decided to leave the top its natural wood color. Pavlo only put a wax coating on it as a means of protecting the wood. The base, however, was still painted and in the same “Antique White” as the chair. The old hardware was not salvageable so I purchased new ones. These are the new, 3″ chrome cap pulls made by Liberty that I selected.